Meera Pumps logo
Meera & Ceiko Pumps
Providing Safe Drinking Water to Millions, World Over
Back to Products Page
 
"Apart from the Meera's regular production of standard pumps of India Mark II family, Afridev, Malda Direct Action, Garden, Pedal and other suction pumps, we can customise hand pumps to meet special needs of our clients. Some of the possible options are given below:"

CUSTOMISED "MEERA" HAND PUMPS

Model Description Suitable for water level range
- mm		 Min.ID of bore
- mm		 Capacity lit/hr
(lph)		 Pump rod/connecting rod Riser pipe
(ND)		 Remarks
Material / (Dia.-mm)
GSW Garden shallow well hand pump with filter point and stand Up to 7 75 1500 MS GI threaded (10) GI/µPVC (32) Cast Iron pump suited for domestic use
SW4 Mild Steel fabricated galvanised Shallow Well Hand Pump Up to 7 75 2000 MS GI threaded (16) GI, µPVC (32/40) Robust pump for community use
DW-VLOM-50/225 India Mark II based VLOM Deep Well Hand Pump(DWHP) 15 to 45 110 1350 MS GI threaded (12) GI/µPVC (50) Specially built for more water output
DW-76-125/175 India Mark II DWHP with Stainless Steel Cylinder 15 to 45 100 1700 - 2400 SS (12) GI/µPVC (32) High discharge pump for corrosive water conditions
DW-GH-50/62.5-125 India Mark II Modified (Ghana Version)with 50mm & 62.5mm, all Brass Cylinders 10 to 60 125 750 - 1150 SS (12) Light Weight SS (32) Suited for deeper installation in corrosive waters
DW-F & L India Mark II based Force & Lift DWHP 15 to 45 110 750 - 1150 MS GI threaded (12) GI/µPVC (32) Force & Lift Conversion Kits can be used on any pump of the India Mark II family.
EDW - BS - 50/175 VLOM DWHP with µPVC pipes and µPVC Cylinder 45 to 90 125 1050 FRG (10) µPVC (50) Pipes and Cylinder made from µPVC with bottom support
NOTE:
  1. Above-ground assemblies of Mild Steel (MS) fabricated pumps are hot dipped galvanised.
  2. Capacity of water discharged is given in litres per hour at a pumping rate of 50 strokes per minute.
  3. Connecting rods are normally about 3 meters in length and made from bright bar with 12 mm dia threads coupler Electro galvanized.
    In case of highly corrosive waters, Stainless steel(SS)/Fibre Reinforced Glass (FRG) connecting rods are
  4. Riser pipes are generally MS hot dip galvanized either of 32 mm, 50 mm or 65 mm NB in 3 meters length.
  5. For highly corrosive water, pumps with µPVC pipes with "Bottom Support" can be supplied on special request. This is suited for deeper static water levels.
 
Top of Page
Home | Product Range | Projects | Research & Development | About Us | Contact Us
 
© Meera & Ceiko Pumps Pvt. Ltd.
4-3-161, 2153/5, Hill Street, Ranigunj,
Secunderabad - 500 003 (A.P) India
Email: info@meera-ceiko.com